The
Tannoy V300 is a premium quality installation cabinet based around a high
power 300 mm (12") point source, constant directivity SuperDual™
transducer.
The SuperDual™ transducer uses larger HF
and LF magnet assemblies and voice coils to provide higher SPL and more
off-axis high frequency energy than the traditional Dual Concentric™
transducer used in the V12. The SuperDual™ utilizes a reinforced paper
cone and rubber surrounds for high sensitivity, a dual magnet assembly,
and HF Tulip WaveGuide™. The high frequency (HF) and low frequency (LF)
sources are coincidentally aligned to a point source. The result is a
smooth, uniform frequency response over a wide coverage area, unachievable
with discrete, two-way designs in the vertical plane where massive
cancellations appear off axis at the crossover frequency. The 90° conical
dispersion of the Dual Concentric™ allows either vertical or horizontal
mounting without compromising sound quality.
Available in black or white, the rugged
multi-ply birch cabinet in an asymmetric profile allows installations in a
variety of configurations.
The V300 is designed to function properly
without the use of any controller. A compatible controller will equalise
the system resulting in improved bass performance as well as providing a
2-way crossover function, operating at 100 Hz, for use with separate V
Series bass systems.
The V300 comes complete with a recessed
carrying handle and 10 mm flying points to provide a quick and secure
flying system. Tannoy’s proprietary Secure-ET mounting, modular design
hardware provides the V Series with multiple hanging options - yoke, wall
mount, ceiling saddle, pole clamp, pole mount, and eyebolts. See the V
Series Hardware cutsheet for details.
PERFORMANCE
Sensitivity
2.83 V @ 1 m |
98 dB (anechoic)
101 dB (half space) |
Impedance |
8 ohm |
Frequency
Response ±3 dB |
70 Hz - 22
kHz |
Power
Handling |
Average |
250
Watt |
Programme |
500
Watt |
|
Maximum SPL |
122 dB (average)
128 dB (peak) |
DRIVE UNITS
Driver
Complement |
1 x 300 mm
(12") Dual Concentric™ |
Dispersion |
90° conical |
CROSSOVER
Frequency |
1.8 kHz |
Type |
Passive |
CONSTRUCTION
Enclosure |
44.5 litre
vented, 15 mm (3/4") birch plywood 25 mm (1") MDF baffle
with perforated black steel grille covered with foam |
Dimensions |
590 mm x
370 mm x 375 mm
(23 1/4" x 14 5/8" x 14 3/4") |
Weight (each) |
34 kg (75
lbs 13 oz) |
Finish |
Textured
black or white paint |
|